Gas Liquid Separation

Operations:

Highly flexible separation operation, where either gas scrubbing or degassing is the primary separation objective;

The GLC provides an accurate gas liquid separation with dry gas and less than 1% by volume gas carry under into the liquid stream;

For gas scrubbing the AFC typically provides no liquid carry over when less than 60% of the inlet gas is removed, and for degassing operations typically no liquid carry over will occur when less than 80% of the inlet gas is removed.

Pressure drops are typically 5 to 20 psig for the GLC, and 50-80 psig for the AFC;

Typical sizes for the GLC are 1 to 6 inches diameter by 1 to 4 ft long. AFC sizes are 4 to 10 inch diameter by 6 to 20 ft long;

Gas liquid processing capacities in the 100 BPD and 500 mscfd up to the 25,000 BPD and 60 mscfd range;